Here to help
GradeGate support
Questions about a scan, a purchase, your account, or your information? Contact Casey Graika:
Include your iPhone model, iOS version, GradeGate version, what you were trying to do, and the message you saw. Where to find these details. Never send passwords, sign-in codes, or payment-card details.
Last updated November 18, 2026
What GradeGate does
GradeGate guides you through photographing a card, then gives a careful visual pre-grade on PSA's 1–10 scale and tells you whether it meets the minimum grade you chose. It helps you decide whether a card may be worth sending for professional grading.
GradeGate doesn't:
- send your card to PSA. Your card never leaves you. When the grading screen says your photos are submitted, it means they went to GradeGate for its pre-grade. If you decide to get a card graded, you send it to PSA yourself.
- promise the grade PSA will give.
- check whether a card is genuine or has been altered.
- tell you what a card is worth.
GradeGate is not affiliated with or endorsed by PSA.
Before you scan
Which cards work?
Sports cards, trading card games (including Pokémon, Magic: The Gathering and Yu-Gi-Oh!) and non-sports cards. You don't pick a category or a size; GradeGate tries to identify the card when it grades your photos.
Sizes that work: standard 2.5 × 3.5 inch cards, and the smaller 59 × 86 mm size used by cards such as Yu-Gi-Oh!. Mini, oversized, tobacco, postcard and die-cut cards, and cards that aren't rectangles, are not supported.
Foil, chrome, refractor and textured cards, and cards with serial numbers, autographs or relic pieces, are fine. Those features don't count as damage on their own. GradeGate doesn't check whether a card, autograph or relic is genuine.
Can I scan a card in a sleeve or holder?
Yes. You don't need to take the card out. GradeGate can scan a card:
- with no protection (choose Raw card)
- in a penny sleeve
- in a semi-rigid holder or rigid toploader, with or without a penny sleeve inside
Not supported: graded slabs from any company (see graded slabs), magnetic one-touch cases and holders you can't see through. On the Confirm card protection screen these come under Slab, magnetic or other holder, which can't start a scan.
Plastic can reflect light or hide fine detail, so a protected card may have more corners or edges that can't be confirmed clean, which can keep its range lower. Clean, clear, unscratched plastic gives the best chance.
Why can't I scan a graded slab?
GradeGate helps you decide whether a card may be worth sending for professional grading, and a slabbed card already has its grade. A slab's thick plastic can also hide fine detail at the corners and edges. If you pick another holder for a slabbed card, the result isn't reliable.
How do I set up for a clear scan?
- Light: soft, even room light. Avoid a lamp shining straight onto the card.
- Surface: a plain, dark, matte surface, with no other cards in view.
- Clean: wipe the camera lens and both sides of any sleeve or holder. Dust and scratches on plastic can look like card damage.
- Keep the card flat: leave it on the table and move the phone for each photo.
- Long edge vertical: the card's long edge runs top to bottom on the screen, even if the artwork is sideways. Keep it that way after you flip the card.
- Portrait: hold your iPhone upright. GradeGate works in portrait only.
Do I need an internet connection?
You need a connection to sign in, buy packs and get a pre-grade. Start Scan also waits for your scan credits to load, so open GradeGate while you're online. The photos are taken and checked on your iPhone, and History, your saved photos and your results open without a connection.
Can I grade photos I already took?
No. GradeGate takes its own photos during the guided scan, because it checks the angle, focus and light as each one is taken. It never reads your Photos library. To keep a copy of a scan photo, open the scan in History, tap a photo, tap Share, and choose Save to Files, AirDrop or another app.
Scanning a card
Your first scan, step by step
You need an iPhone with iOS 18 or later. Taking the photos doesn't use a scan credit.
- On the Scan tab, tap Start Scan (if it's greyed out, see Start Scan is greyed out). Choose Protected or Raw card, then tap Begin Guided Scan.
- Protected card: keep the whole card in the guide for a moment while GradeGate looks for a holder, check the layers it shows, then tap Submit & Start Scan. Raw cards skip this step.
- Front sweep: five photos. The first is straight above the card. For the other four, move the phone a little to the left, to the right, toward the card's top and toward its bottom, keeping it aimed at the card. Each photo takes itself when you hold still, or you can tap Take Photo.
- GradeGate may ask you to check the card border, and may ask for an optional corner close-up.
- At Front sweep complete, flip the card, lay it flat with the long edge vertical, and tap Start Back Sweep. The back gets the same five photos, and GradeGate may again ask you to check the card border or take a corner close-up.
- On Review Evidence, look over your photos and retake any that look unclear. Then tap Start Pregrade (see Review if the button says something else).
- Your result is saved in History on this iPhone.
You can replay the short intro any time in GradeGate's Settings → Help & About → How GradeGate Works.
Protected or Raw card, and confirming the holder
Choose Protected if the card is in a sleeve or holder. Choose Raw card only when it's completely out of any sleeve or holder.
For a protected card, check each layer on Confirm card protection. GradeGate uses your answer when it checks and grades the photos.
- Inner sleeve: Penny sleeve starts ticked, because a sleeve inside a clear holder is hard to spot. Untick it if there's no sleeve.
- Outer holder: if GradeGate is fairly sure, its guess is selected and marked Detected. Otherwise tap the right one. Detect Again looks again.
Then tap Submit & Start Scan to start the photos. Nothing is graded and no credit is used yet.
Moving the phone, and when a photo won't take
Leave the card flat and move the phone, not the card. After the straight-on photo, swing the phone in a small arc to your left, to your right, toward the card's top edge and toward its bottom edge, keeping it aimed at the card. That's what Move Phone Left, Right, Up and Down mean. When the angle is right, hold still for about half a second and the photo takes itself. If it says Move the phone slightly left or right, or Move slightly back toward the card's center, you've tilted a little too far.
If a photo won't take, tap Take Photo. GradeGate may then ask you to check the card border.
Tapping the camera view or the pause button pauses the scan and shows an animation of the next move. You don't need to tap to focus; the camera focuses on its own. Tap Resume Scan to carry on.
Checking the card border and corners
Sometimes GradeGate asks you to check its work, for example after you tap Take Photo, after the straight-on photo of a protected card, or when a photo didn't pass its checks.
Check the card border: drag the four points onto the card's own outer corners, not the corners of the sleeve or holder, and not a printed frame inside the card. Snap to edges, Auto-fit and Undo can help. Then tap Use Card Crop, or Retake.
Confirm the card's corners: drag each yellow guide so its two arms lie along the card's own edges, not the sleeve or holder. Then tap the button at the bottom.
Taking a good corner close-up
GradeGate may ask for a close-up of a corner it couldn't see well in the photos. Close-ups are optional, but a corner without a clear photo can lower the range.
- Put the card's corner tip in the circle, with its two edges along the dashed lines and a little background showing. Rounded and square corners both fit.
- Hold still and the photo takes itself, or tap the round shutter button.
- Check the photo shows the card's own corner, not the sleeve's or holder's, then tap Use Corner Photo.
- "Too close to focus" means the phone is closer than the camera can focus. Move back a little.
Stuck? Tap Skip, at the bottom left. You can add or replace corner photos later on Review Evidence.
Why can't I start the pre-grade from Review?
The button at the bottom of Review Evidence stays unavailable until every card view passes its checks. Look for a photo marked Needs sharper retake or Needs retake and tap its Retake; GradeGate takes you back to that same view. If photos still say Checking focus…, give it a moment. If Review says Review a corner photo, a corner photo couldn't be used: tap Retake under it, or Continue without this photo.
Corner and edge photos are optional. A line such as "2 corners without detail photos" means some areas have no close view, and the button reads Pre-Grade with Missing Detail. Tap that line to add photos, or continue anyway; missing detail can lower the range. If the button reads Get Credits to Grade, you need a scan credit first.
Troubleshooting
Start Scan is greyed out, or a note says something is unavailable
Your credits aren't lost. Here's what each note under Start Scan means:
- "Checking your scan credits…": your balance is loading. This needs an internet connection.
- "Couldn't load your scan credits.": check your connection, then tap Try Again.
- "New pre-grades aren't available right now.": GradeGate isn't taking new pre-grades at the moment, or not yet for your account. Your balance won't change. Please try again later.
- "Visual pre-grades are unavailable right now.": grading is switched off for the moment. Please try again later.
- "…Scan packs aren't available right now.": you're out of credits, and packs couldn't load or aren't on sale. Check your connection, tap your credit balance on the Scan tab, and choose Refresh Credit Balance.
If a note doesn't go away, email support.
The camera won't open, or the preview is black
If you see "Camera access was denied", GradeGate isn't allowed to use the camera, and your iPhone won't ask again on its own. Tap Open Settings, turn on Camera, then go back to GradeGate and start the scan again. You can also open the iPhone Settings app, tap Privacy & Security, then Camera, and turn on GradeGate.
If the camera stays black or says it's interrupted or unavailable, tap Try Again or Retry This View if you see one. If you see Back to Review, it keeps the photos you've taken. If nothing helps, tap Exit Scan and start again. Exit Scan doesn't keep that scan's photos, so if you've taken any, GradeGate asks before it discards them.
GradeGate uses the camera only while you scan. It never asks for your microphone, and it asks for Photos only to add a report’s listing image when you choose Save Image (see sharing a report).
Photos keep failing the focus check
If photos keep coming back marked Needs sharper retake, or the camera says it couldn't confirm focus:
- Add soft, even light.
- Wipe the camera lens.
- Raise the phone a little. iPhone cameras can't focus very close.
- Hold still for a moment, or tap Take Photo.
Still stuck? Email support@gradegate.ai with what you see on screen.
Understanding your result
GradeGate provides a conservative, uncalibrated visual pre-grade. It does not authenticate cards or guarantee a professional grading result. Lighting, photographs, protection, and hidden damage affect what can be assessed. GradeGate is not affiliated with or endorsed by PSA.
How to read your result
- Worth Sending: the low end of the estimated range meets or beats your minimum grade.
- Below Your Minimum: the low end and the most likely grade are both under your minimum. It isn't a statement about the card's value.
- Not Confirmed: the most likely grade meets your minimum, but the low end doesn't, so GradeGate can't confirm the card reaches it. Like Below Your Minimum, it isn't a statement about the card's value.
- Rescan Needed: the photos weren't clear enough for a careful call, so GradeGate doesn't guess. On a scan paid with a scan credit, you see Couldn't finish the pre-grade instead, and the credit isn't used.
The estimated range, such as 8–9, comes with the most likely grade. The recommendation always uses the low end, the careful end. Assessment confidence is how sure the analysis was of its own estimate, not a measure of accuracy. Under Corners and edges, tap any corner or edge to read its note.
Why a clean-looking card can come back 8–9
GradeGate checks 8 corners and 8 edges, front and back. If the photos aren't clear enough to confirm that a spot is clean, it's marked Unresolved under Corners and edges, and Not confirmed under Visual findings. That doesn't mean damage was confirmed; it can also mean a possible flaw showed in only one photo. Either way, it keeps the range lower instead of assuming the spot is perfect. On a scan paid with a scan credit, any unconfirmed spot keeps the estimate at PSA 9 or lower, with the low end at PSA 8 or lower. With the default minimum of PSA 9, that means Not Confirmed when the most likely grade is 9, and Below Your Minimum otherwise.
To help, add the missing corner and edge photos on Review Evidence before you grade, and use soft, even light and clean plastic. No photo guarantees a clear reading.
Your minimum grade
Your minimum grade is the lowest grade you'd want before sending a card to PSA. It starts at PSA 9 and is kept on this iPhone. To change it, open GradeGate's Settings and tap a number under Your minimum grade. On a result, Recheck this result lets you try a different number for that card. Saved scans keep the recommendation made when you scanned.
How accurate is it, and what if PSA grades the card differently?
GradeGate's estimate is uncalibrated: it hasn't been measured against a large set of real PSA grades, so it doesn't claim an accuracy rate. It's built to be careful instead.
PSA looks at the actual card, so its grade can be different. Photos can't show everything. Hidden damage, print variation and alterations such as trimming all affect a professional grade. Lighting, your iPhone's camera and any sleeve or holder affect what GradeGate can see. A completed pre-grade uses its credit whatever grade it gives. If a result looks clearly wrong, for example it names damage your photos don't show, email support with the scan's date and time.
The card name GradeGate suggests
After grading, GradeGate suggests what the card is under Suggested identity. It's a best guess from your photos, not authentication, and it can be wrong. GradeGate doesn't need the right name to give a pre-grade, because the estimate is about the card's condition in the photos.
History and sharing
Your saved scans
Every finished result saves itself to the History tab. Tap a scan to see its recommendation, range, photos, and corner and edge notes. To delete one scan, swipe left on it in History and tap Delete. Deleting can't be undone.
Your scans are kept on this iPhone, not in your GradeGate account. GradeGate doesn't sync them to the cloud or to another device, and signing out or switching accounts doesn't change them.
Sharing a GradeGate Detailed Report
On a result or a saved scan, tap Share Detailed Report (PDF) to make the PDF on your iPhone, then send it however you like. It includes the card photos with large corner close-ups, the suggested card name, the visual pre-grade range, the corner and edge results, GradeGate's grading notes (its own explanation for each corner or edge it couldn't confirm clean and each defect it found), the scan date and a report ID. It doesn't include your name, email, credits or purchases.
For a sale listing, tap Share for a Buyer, then Listing Image, to share one picture of the report's first page. Choose Save Image to add it to your photo library. That's the only time GradeGate asks for Photos access, and it can add the picture but never see your photos.
A Detailed Report shows a scan whose photos passed GradeGate's capture checks, and the visual pre-grade it got on that date. It describes the scan, not the card: it isn't a PSA grade, doesn't authenticate the card, and doesn't prove that a card you receive is the one photographed. Only saved scans graded with a scan credit can make a report.
Online check: letting buyers check your report
A report carries a QR code and "Check online: gradegate.ai/v". The QR code opens the report's GradeGate Signed Report, the results GradeGate signed when it graded the scan. With Online check on, which it is unless you turn it off for that scan, sharing the report also publishes its signed results (the suggested card name and number, the pre-grade, the holder, the condition results, the graded date and the report reference) and its graded front and back photos at gradegate.ai. Anyone with the QR code, the report's link or the reference can then check it. Nothing about your account is published.
To send a buyer a link instead of a file, tap Share for a Buyer, then Signed Report link. It puts the report online if it isn't already and shares its address at gradegate.ai, which opens the report, with its front and back photos when they went online. Link needs Online check on, and the link stops working when the report goes offline. If the report can't go online, for example with no connection or no account signed in, GradeGate says so and shares nothing. A report made before online checks has no link.
The report stays online until you turn Online check off for that scan or delete your account; either takes it down within a few minutes. To share a report without publishing it, turn Online check off before you share.
Checking a report you were sent
Open the link the seller sent, scan the report's QR code, or go to the GradeGate Signed Report page (gradegate.ai/v) and type the reference printed at the foot of each page. It starts with GG- and has twelve letters and numbers.
- Signed by GradeGate: GradeGate's server signed these results when it graded the scan. Compare them with the Detailed Report line by line. If anything differs, the report was changed after GradeGate made it.
- Test scan: made by GradeGate's test system while the app was being tested, not a customer's report.
- Doesn't match or Withdrawn: GradeGate doesn't vouch for these results. Don't rely on the report.
- Not found: no report with that reference is published. The seller may have turned Online check off, or the reference may be mistyped.
Reports made before online checks say so and have no QR code, so they can't be checked. The signed results in a QR code's link come after its #, which your browser never sends to GradeGate. Your browser checks the signature itself, then looks up only the report's reference to show any published photos. GradeGate signs with a key kept in Google Cloud's key management service, which never leaves it; the public keys the check trusts are listed at gradegate.ai/report-keys.json. To see a check without a report, open the homepage's example, GG-DEMO-0001. A check shows what GradeGate found in the photographed scan, not the card you receive.
Scan credits and purchases
Credits belong to the Apple or Google sign-in you used in GradeGate when you bought them, not to the Apple Account that paid. If your balance looks wrong, sign in that way, make sure you're online, tap your credit balance on the Scan tab, and choose Refresh Credit Balance. Interrupted App Store purchases finish the next time you open GradeGate signed in to that account.
Taking and reviewing photos is free. One credit pays for a completed visual pre-grade, whether it's Worth Sending, Below Your Minimum or Not Confirmed. If the photos need a rescan, the credit isn't used. If local saving fails, Retry Save retries saving the same result without another charge. Leaving the grading screen or closing GradeGate doesn't stop a pre-grade that has started; if it finishes, it uses its credit. If you tap Back to Review before the screen says your photos are submitted, the upload stops instead, and the credit set aside for it comes back on its own, usually within about 20 minutes.
If you were charged and can't see your result, email support with the date and time, and Casey will look into it. For an Apple purchase refund, use Apple's Report a Problem service. Apple determines refund eligibility.
Your account and iPhone
Signing in
GradeGate needs an Apple or Google sign-in so your scan credits are kept with your account and survive a reinstall or a new iPhone. GradeGate receives only what Apple or Google shares: an account identifier and the profile details you allow, such as your name and email, and with Google your profile picture. Signing in doesn't upload your scan history.
Use the same sign-in every time; credits bought with one won't show under the other. If signing in fails, check your connection and try again.
New iPhone, reinstalling, and Restore Purchases
Your scan credits come back on their own when you sign in with the same Apple or Google account, which is why there's no Restore Purchases button.
Scan history and card photos are different. They're kept only on this iPhone, GradeGate has no cloud copy, and deleting the app deletes them. Moving to a new iPhone from a backup or a direct transfer may bring them along; setting it up as new won't. To keep a copy of a result, use Share Detailed Report (PDF) first. Short on space? Offload GradeGate instead of deleting it (iPhone Settings → General → iPhone Storage → GradeGate → Offload App). That keeps your history.
Sharing an iPhone or switching accounts
Credits belong to whoever is signed in. Scan history, card photos and your minimum grade belong to the iPhone, so anyone who signs in on it can see them. To switch accounts, open GradeGate's Settings, tap your account at the top, tap Sign Out at the bottom of Account Details, then sign in with the other account. Signing out doesn't delete anything.
Deleting your account or scan history
Delete GradeGate Account is at the bottom of GradeGate's Settings, under Delete data. Deleting your account removes your sign-in and gives up any unused scan credits for good. Credits can't be moved to another account, and this can't be undone. If you signed in with Apple, you'll be asked to confirm with Apple; cancelling there keeps your account.
Your saved scans and their photos stay on this iPhone after you sign out or delete your account. Delete scans one at a time in History, or choose Delete All Scan History under Delete data in Settings. On a shared iPhone, that removes every scan on the device, for every account. If a pre-grade is still in progress, wait for it to finish first: deleting your history or your account removes what GradeGate needs to collect that result. GradeGate has no cloud copy, so it can't recover deleted scans. An earlier iPhone backup may still hold them.
What happens to my card photos?
While you scan, the camera view is checked on your iPhone and nothing is uploaded. GradeGate uploads photos only when you start a pre-grade: then the photos you reviewed are sent through Firebase and Google Cloud to Google's Gemini AI for analysis. GradeGate doesn't keep a cloud library of your scans or a collection of photos for training. Keep people, addresses and other personal details out of the photos.
Read the privacy policy for details about AI processing, retention, diagnostics, and deletion. Email the address above if you can't use account deletion or need help with a privacy request.
Contacting support
GradeGate is made and supported by one person, Casey Graika, who reads every message. Email support@gradegate.ai. Ideas and feature requests are welcome too. Your scan history stays on your iPhone, so Casey can't look it up; please describe what happened.
What to include
- What you were trying to do, and the message you saw. A screenshot of the message helps.
- Your iPhone model and iOS version: iPhone Settings → General → About.
- Your GradeGate version: in GradeGate, Settings → Help & About → Version.
Never send passwords, sign-in codes, or payment-card details. Please avoid sending card photographs or other personal information unless needed to explain the issue.
Sending diagnostics
A diagnostics file helps Casey see what went wrong, and it already includes your iPhone model and the iOS and GradeGate versions. Open GradeGate's Settings and, under Privacy and data, tap Export Diagnostics. Choose Mail and send it with a note about what you were doing. It's a technical log of screens, timings, error messages, results and credit status. It never includes card images, card names, or your name or email; for the full list, tap Privacy Details in the same section and read Diagnostics. Sending it is optional. Export before you delete the app or use Delete All Scan History, because both erase the log.
If GradeGate crashes or won't open
GradeGate sends crash reports automatically, without card images, card names or account details. When you write, say roughly when it happened, what you were doing, and your iPhone model and iOS version, so the report can be found.